De-icers,Winterizing
Ice Eater by Power House 3/4HP Ice Eater w/100′ Cord – 115V
Ice Eater by Power House 3/4HP Ice Eater 230V
Ice Eater P750
- 3/4 H.P. energy efficient high quality motor with 36 pounds thrust
- 2.5 amps, 230 volt, one phase, 60/50 cycle
- 25 foot quick change power cord
- Two 25 foot x 3/8 hollow braided mooring lines with shackles
- Dimensions of shipping box 14 1/2 x 14 1/2 x 16 1/8
- Weight 45 pounds
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
- Motor shaft is 316 stainless steel, the best material for salt water application
- Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
- Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
- Stator motor windings have double impregnation of baked insulating varnish
- Two heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
- Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
- Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
- Twenty-five feet of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
- Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
- Performance certified tested at our facility for proper output and leaks before shipment
- Best three-year limited warranty in the marketplace
- Comes complete, just open the box, remove and install
- Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application
Ice Eater by Power House 1HP Ice Eater w/25′ Cord – 230V
1HP Ice Eater with 25' Cord - 230V
Features:
Features:
- 1HP energy efficient high quality motor
- 230V, 3.5 Amps, 1 phase, 60/50 cycle
- 25' quick change power cord
- 2 - 25' x 3/8 hollow braided mooring lines with shackles
- Dimensions of shipping box, 14-1/2 x 14-1/2 x 16-1/8
- Shipping weight 45 lbs
- For large boats, marinas and heavier uses
- Can be used in place of several smaller units
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NMEA specifications and is UL and CSA compliant, and C.E. certified
- Motor shaft is 316 stainless steel, the best material for salt water application
- Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
- Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
- Stator motor windings have double impregnation of baked insulating varnish
- 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
- Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
- Propeller is custom designed for maximum thrust and performance Propeller screws on shaft for easy removal and replacement
- 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
- Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
- Performance certified tested at our facility for proper output and leaks before shipment
- Best 3-Year limited warranty in the marketplace
- Comes complete, just open the box, remove and install
- Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application
Taylor Made 6215 Thermostat 25 On/35 Off – Saltwater Recommended
Ice Eater by Power House 1HP Ice Eater w/25′ Cord – 115V
Features:
- 1HP energy efficient high quality motor
- 115V, 7.0 Amps, 1 phase, 60/50 cycle
- 25' quick change power cord
- 2 - 25' x 3/8 hollow braided mooring lines with shackles
- Dimensions of shipping box, 14-1/2 x 14-1/2 x 16-1/8
- Shipping weight 45 lbs
- For large boats, marinas and heavier uses
- Can be used in place of several smaller units
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NMEA specifications and is UL and CSA compliant, and C.E. certified
- Motor shaft is 316 stainless steel, the best material for salt water application
- Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
- Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid Additional double lip shaft seal for extra protection
Ice Eater by Power House 3/4HP Ice Eater w/25′ Cord – 115V
3/4HP Ice Eater with 25' Cord - 115V
Features:
Features:
- 3/4HP energy efficient high quality motor with 36 pounds thrust
- 4.7 Amps, 115V, 1 phase, 60/50 cycle
- 25' quick change power cord
- 2 - 25' x 3/8 hollow braided mooring lines with shackles
- Dimensions of shipping box 14-1/2 x 14-1/2 x 16-1/8
- Weight 45 lbs
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
- Motor shaft is 316 stainless steel, the best material for salt water application
- Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor; Motor and capacitor are matched for ultimate performance
- Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid; Additional double lip shaft seal for extra protection
- Stator motor windings have double impregnation of baked insulating varnish
- 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
- Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
- Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
- 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
- Heavy duty PVC custom brackets that attach motor to shroud; All stainless bolts and locking aircraft nuts are used
- Performance certified tested at our facility for proper output and leaks before shipment
- Best three-year limited warranty in the marketplace
- Comes complete, just open the box, remove and install
- Optional thermostat custom design turns Ice Eater on when needed. Ideal for unattended application
Ice Eater by Power House 1/2HP Ice Eater w/25′ Cord – 115V
1/2HP Ice Eater with 25' Cord - 115V
Features:
Features:
- 1/2HP energy efficient high quality motor with 28 pounds thrust
- 5.0 Amps, 115V, 1 phase, 60/50 cycle
- 25' quick change power cord
- 2 - 25' x 3/8 hollow braided mooring lines with shackles
- Dimensions of shipping box 12-5/8 x 12-5/8 x 12-3/4
- Weight 36 lbs
- Motor housing is constructed of 16 gauge 304 stainless steel and bronze endbell for corrosion free operation in fresh or salt water; Motor exceeds NEMA specifications and is UL and CSA compliant, and C.E. certified
- Motor shaft is 316 stainless steel, the best material for salt water application
- Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor. Motor and capacitor are matched for ultimate performance
- Internal, heavy duty, hard faced mechanical seal with stainless components immersed in dielectric lubricating fluid. Additional double lip shaft seal for extra protection
- Stator motor windings have double impregnation of baked insulating varnish
- 2 heavy duty ball bearings provide support for the rotor while being cooled with dielectric type oil
- Sacrificial custom designed zinc is provided for conditions where electrolysis may be present
- Propeller is custom designed for maximum thrust and performance; Propeller screws on shaft for easy removal and replacement
- 25' of 16/3 water and oil resistant cord with three prong molded plug is standard; Additional length cord available: 50 and 100 feet
- Heavy duty PVC custom brackets that attach motor to shroud. All stainless bolts and locking aircraft nuts are used.
- Performance certified tested at our facility for proper output and leaks before shipment
- Best 3-Year limited warranty in the marketplace
- Comes complete, just open the box, remove and install
- Optional thermostat custom design turns Ice Eater on when needed; Ideal for unattended application