Intel I210T1BLK Single Port PCI-Express x1 Ethernet Server Adapter

Specifications

• Mfr Part Number: I210T1BLK
• General Features:
  • Intel Ethernet Controller I210 w/ PCI Express v2.1 Support
  • Low Halogen
  • Low profile single-port copper adapter
  • Ship with full-height bracket installed; low-profile bracket included in package, Single-scew mount
  • Ventilated bracket
• Ethernet Features:
  • Audio-Video Bridging (AVB) Support (802.1 Qav)
  • IEEE 802.3 auto-negotiaton
  • 1 Gb/s Ethernet IEEE 802.3, 802.3u, 802.3ab PHY specifications compliant
  • Integrated PHY for 10/ 100/ 1000 Mb/s for multi-speed, full, and half-duplex
  • IEEE 802.3x and IEEE 802.3z compliant flow control support with software-controllable Rx thresholds and Tx pause frames
  • Automatic cross-over detection function (MDI/MDI-X)
  • IEEE 1588 protocol and 802.1AS implementation
• Power Management and Efficiency:
  • IEEE 802.3az – Energy Efficient Ethernet (EEE)
  • DMA Coalescing
  • Smart Power Wown (SPD) at S0 no link/Sx no link
  • Active State Power Management (ASPM)
  • LAN disable function
  • Full wake up support
    • Advanced Power Management (APM) Support (formerly Wake on LAN)
    • Advanced Configuration and Power Interface (ACPI) specification v2.0c
    • Magic Packet wake-up enable with unique MAC address
  • ACPI register set and power sown functionality supporting D0 and D3 states
  • MAC Power Management controls
  • Low Power Link Up – Link Speed Control
  • Power Management Protocol Offload (Proxying)
• Stateless Offloads/Performance Features:
  • TCP/UDP, IPv4 checksum offloads (Rx/ Tx/Large-send); Extended Tx descriptors
  • IPv6 support for IP/TCP and IP/UDP receive checksum offload
  • Transmit Segmentation Offloading (TSO) (IPv4, IPv6)
  • Interrupt throttling control
  • Legacy and Message Signal Interrupt (MSI)
  • Message Signal Interrupt Extension (MSI-X)
  • Intelligent interrupt generation
  • Receive Side Scaling (RSS) for Windows
  • Scalable I/O for Linux environments (IPv4, IPv6, TCP/UDP)
  • Support for packets up to 9.5K Bytes (Jumbo Frames)
  • Low Latency Interrupts
  • Header/packet data split in receive
  • PCIe v2.1 TLP Processing Hint Requester
  • Descriptor ring management hardware for Transmit and Receive
• Remote Boot Option Features:
  • Preboot eXecution Environment (PXE) flash interface support
  • Intel iSCSI Remote Booo for Windows, Linux, and VMware
  • Intel Boot Agent software– Linux boot via PXE or BOOTP Windows Deployment Services, or UEFI
  • Descriptor ring management hardware for transmit and receive
• Manageability Features:
  • DMTF Network Controller Sideband Interface (NC-SI) Pass-through
  • Intel System Management Bus (SMBus) Pass-through
  • Management Component Transport Protocol (MCTP) over SMBus and PCIe
  • OS2BMC Traffic support
  • Private OS2BMC Traffic Flow
  • Firmware Based Thermal Management
  • IEEE 802.3 MII Management Interface
  • MAC/PHY Control and Status
  • Watchdog timer
  • Extended error reporting
  • Controller Memory Protection
  • Vital Product Data (VPD) Support
• Standards: IEEE 802.3/10BASE-T, 100BASE-T, 1000BASE-T
• Controller Processor: Intel Ethernet Controller I210
• Connectors: 1x RJ45 (Copper)
• Data Rate: 10/100/1000 Mbps Per Port
• Cabling:
  • Category-3 or higher for 10BASE-T operation
  • Category-5 or higher for 100BASE-TX operation
  • Category-5e or higher for 1000BASE-T operation
• Bus Type: PCI-Express 2.1 (2.5 GT/s)
• Bus Width: PCI-Express x1; operable in x1 or greater slots
• Interrupt Levels: INTA, INTB, INTC, INTD, MSI, MSI-X
• Power Consumption: 0.81W Typical
• Certifications: FCC B, UL, CE, VCCI, BSMI, CTICK, KCC
• Dimensions (WxLxH):
  • Full-height End Bracket: 0.709 x 2.640 x 4.755 inch / 1.80 x 6.70 x 12.07 cm
  • Low-profile End Bracket: 0.709 x 2.640 x 3.150 inch / 1.8 x 6.7 x 8.0 cm